Performance Enhancement of Single-Chamber Sediment-Microbial Fuel Cell with Variation in Cathode Surface Area

Teng Howe Cheng, Kok Boon Ching, Chessda Uttraphan, Yee Mei Heong

Abstract


This study investigates the impact of cathode surface area on single chamber sediment-microbial fuel cell (S-MFC). A fixed graphite anode surface area of 0.000471m2 has been used on four S-MFCs coupled with four carbon fiber cloth cathode electrodes with variation of surface area. Pond sediment has been used as the anode medium that inoculated with acetate as substrate to ramp up the amount of electrochemical-active bacteria (EAB). The S-MFCs has been operated and monitored for 120 hours using Arduino based data logger. The outcomes of this observation period have indicated the S-MFC with larger cathode surface area (0.01m2) possess smaller internal resistance (123.96±2.68 Ω) and thus performed significantly better than other S-MFC with the smaller cathode surface area, resulting with average voltage and current of 0.598±0.008V and 4.827±0.124mA respectively, where a maximum power density of 2.867mW with a coulombic efficiency of 64.63% was achieved. Successful performance increase suggests enlargement of the cathode area could be the alternative to reduce the internal resistance in traditional MFCs for electricity generation.

Keywords


Sediment-Microbial Fuel Cell; Cathode Surface Area; Internal Resistance; Increased Performance; Coulombic Efficiency

Full Text:

PDF

References


P. Mazidi, G. N. Baltas, M. Eliassi, and P. Rodriguez, “A Model for Flexibility Analysis of RESS with Electric Energy Storage and Reserve,†7th Int. IEEE Conf. Renew. Energy Res. Appl. ICRERA 2018, vol. 5, pp. 1004–1009, 2018.

T. Sakagami, Y. Shimizu, and H. Kitano, “Exchangeable batteries for micro EVs and renewable energy,†2017 6th Int. Conf. Renew. Energy Res. Appl. ICRERA 2017, vol. 2017-January, pp. 701–705, 2017.

O. T. Winarno, Y. Alwendra, and S. Mujiyanto, “Policies and strategies for renewable energy development in Indonesia,†2016 IEEE Int. Conf. Renew. Energy Res. Appl. ICRERA 2016, vol. 5, pp. 270–272, 2017.

F. Wr et al., “Hybrid Renewable Energy System based on Intelligent Optimization Techniques,†vol. 5.

A. Harrouz, M. Abbes, I. Colak, and K. Kayisli, “Smart grid and renewable energy in Algeria,†vol. 5, pp. 1166–1171, 2017.

L. M. Tender et al., “The first demonstration of a microbial fuel cell as a viable power supply: Powering a meteorological buoy,†J. Power Sources, vol. 179, no. 2, pp. 571–575, 2008.

H. C. Teng, B. C. Kok, C. Uttraphan, and M. H. Yee, “A Review on Energy Harvesting Potential from Living Plants : Future Energy Resource,†Int. J. Renew. Energy Res., vol. 8, no. 4, pp. 2598–2614, 2018.

N. Kaku, N. Yonezawa, Y. Kodama, and K. Watanabe, “Plant/microbe cooperation for electricity generation in a rice paddy field,†Appl. Microbiol. Biotechnol., vol. 79, no. 1, pp. 43–49, 2008.

R. A. Timmers, D. P. B. T. B. Strik, H. V. M. Hamelers, and C. J. N. Buisman, “Electricity generation by a novel design tubular plant microbial fuel cell,†Biomass and Bioenergy, vol. 51, pp. 60–67, 2013.

T. H. Cheng, K. B. Ching, C. Uttraphan, and Y. M. Heong, “Continuous Monitoring and Analysis of Pandanus Amaryllifolius Microbial Fuel Cell Power Generation in Daily Solar Radiation,†Int. J. New Innov. Eng. Technol., vol. 12, no. 1, pp. 93–103, 2019.

T. H. Cheng, K. B. Ching, C. Uttraphan, and Y. M. Heong, “Electrical energy production from plant biomass : an analysis model development for pandanus amaryllifolius plant microbial fuel cell,†Int. J. Electr. Eng. Comput. Sci., vol. 18, no. 3, pp. 1163–1171, 2020.

J. Sun, Y. Hu, Z. Bi, and Y. Cao, “Improved performance of air-cathode single-chamber microbial fuel cell for wastewater treatment using microfiltration membranes and multiple sludge inoculation,†J. Power Sources, vol. 187, no. 2, pp. 471–479, 2009.

B. E. Logan and J. M. Regan, “Electricity-producing bacterial communities in microbial fuel cells,†Trends Microbiol., vol. 14, no. 12, pp. 512–518, 2006.

A. Simmons et al., “Microbial Fuel Cells Generating Electricity from Rhizodeposits of Rice Plants,†Environ. Ethics, vol. 29, no. 3, pp. 267–278, 2007.

B. Lóránt, M. Gyalai-Korpos, I. Goryanin, and G. M. Tardy, “Single chamber air–cathode microbial fuel cells as biosensors for determination of biodegradable organics,†Biotechnol. Lett., vol. 4, pp. 555–563, 2019.

J. Chouler et al., “Towards effective small scale microbial fuel cells for energy generation from urine,†Electrochim. Acta, vol. 192, pp. 89–98, 2016.

A. Fujinaga, K. Tei, H. Ozaki, R. Takanami, and S. Taniguchi, “Evaluation of the Effect of Graphite Powder in Decreasing the Internal Resistance for Microbial Fuel Cell Using Soil,†J. Water Environ. Technol., vol. 14, no. 3, pp. 141–148, 2016.

N. Jannelli, R. Anna Nastro, V. Cigolotti, M. Minutillo, and G. Falcucci, “Low pH, high salinity: Too much for microbial fuel cells?,†Appl. Energy, vol. 192, pp. 543–550, 2017.

X. Li, X. Wang, Q. Zhao, L. Wan, Y. Li, and Q. Zhou, “Carbon fiber enhanced bioelectricity generation in soil microbial fuel cells,†Biosens. Bioelectron., vol. 85, pp. 135–141, 2016.

Z. Chen, Y. chao Huang, J. hong Liang, F. Zhao, and Y. guan Zhu, “A novel sediment microbial fuel cell with a biocathode in the rice rhizosphere,†Bioresour. Technol., vol. 108, pp. 55–59, 2012.

Z. He, H. Shao, and L. T. Angenent, “Increased power production from a sediment microbial fuel cell with a rotating cathode,†Biosens. Bioelectron., vol. 22, no. 12, pp. 3252–3255, 2007.

S. Venkata Mohan, G. Mohanakrishna, and P. Chiranjeevi, “Sustainable power generation from floating macrophytes based ecological microenvironment through embedded fuel cells along with simultaneous wastewater treatment,†Bioresour. Technol., vol. 102, no. 14, pp. 7036–7042, 2011.

R. Nitisoravut and R. Regmi, “Plant microbial fuel cells: A promising biosystems engineering,†Renew. Sustain. Energy Rev., vol. 76, no. September 2016, pp. 81–89, 2017.

J. M. Pisciotta, Z. Zaybak, D. F. Call, J. Y. Nam, and B. E. Logan, “Enrichment of microbial electrolysis cell biocathodes from sediment microbial fuel cell bioanodes,†Appl. Environ. Microbiol., vol. 78, no. 15, pp. 5212–5219, 2012.

Y. Yang, L. Yan, J. Song, and M. Xu, “Optimizing the electrode surface area of sediment microbial fuel cells,†RSC Adv., vol. 8, no. 45, pp. 25319–25324, 2018.

S. Chen, B. Chen, and B. D. Fath, “Assessing the cumulative environmental impact of hydropower construction on river systems based on energy network model,†Renew. Sustain. Energy Rev., vol. 42, no. 19, pp. 78–92, 2015.

Y. Fan, H. Hu, and H. Liu, “Enhanced Coulombic efficiency and power density of air-cathode microbial fuel cells with an improved cell configuration,†J. Power Sources, vol. 171, no. 2, pp. 348–354, 2007.

J. Li et al., “Voltage reversal causes bioanode corrosion in microbial fuel cell stacks,†Int. J. Hydrogen Energy, vol. 42, no. 45, pp. 27649–27656, 2017.

T. Ewing, P. T. Ha, and H. Beyenal, “Evaluation of long-term performance of sediment microbial fuel cells and the role of natural resources,†Appl. Energy, vol. 192, pp. 490–497, 2017.

M. Devasahayam and S. A. Masih, “Microbial fuel cells demonstrate high coulombic efficiency applicable for water remediation,†Indian J. Exp. Biol., vol. 50, no. 6, pp. 430–438, 2012.

H. Lin, S. Wu, and J. Zhu, “Modeling power generation and energy efficiencies in air-cathode microbial fuel cells based on Freter Equations,†Appl. Sci., vol. 8, no. 10, pp. 1–16, 2018.




DOI (PDF): https://doi.org/10.20508/ijrer.v10i1.10562.g7909

Refbacks



Online ISSN: 1309-0127

Publisher: Gazi University

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);

IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.

WEB of SCIENCE between 2020-2022; 

h=30,

Average citation per item=5.73

Impact Factor=(1638+1731+1808)/(189+170+221)=9.24

Category Quartile:Q4